Handlebar Grips/Tape

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip

Ergonomic shape relieves nerve pressure for optimum comfort. - Gel rubber construction offers excellent durability - Diamond pattern for excellent grip

The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.

Chromag's Squarewave grip is designed with performance and comfort as the paramount goals. The gentle bulge fits nicely in the cup of the hand to promote long ride comfort. The progressive tread is finest/softest where it meets the outer edges of the hand and coarsest under the meat of the palm for a balance of compliance and control over longer rides.

• Larger diameter model for bigger hands, offers extra cushion • Same bulged center as the original Squareweave • Aluminum clamps secure the grip on both for twist-free performance

- 31mm grip with micro diamond pattern - Kevlar infused TRC + ruber compound

With sweeping transitions from the padded thumb area to the deep-dish diamond top pattern to a recessed half-waffle, the LOCKJAW delivers a technically precise feel from end to end. Utilizing our TRC+ rubber compound allows us to maintain industry-leading durability delivered in a soft, plush, and sticky durometer. By combining our tapered inner sleeve and single lock ring system, coupled with our new extra-grippy rubber and recessed half waffle, the LOCKJAW gives you an extremely responsive-feeling cockpit. If you are looking for the ultimate control at your fingertips, the LOCKJAW continues to elevate the renowned DEITY Grip line to new levels. - Padded thumb area for comfort and smooth transitions - Recessed half-waffle design for added control without hot spots - Deep dish DEITY diamond pattern compresses for comfort but also provides unrivaled traction - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice! - 104 grams for the set

The grip of choice for World Cup-style assassin and gloveless wonder, Sam Blenkinsop, the KNUCKLEDUSTER embodies our attention to detail and our focus on function! Not only have we developed our TRC rubber blend that gives you remarkable grip with incredible durability, the KNUCKLEDUSTER also features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and, coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel in a stunning package. Featuring a mushroom pattern to minimize vibration, the true magic of the KNUCKLEDUSTER lies in the V channel chevron ribs that ergonomically fill the swell of your palm and then seamlessly transition to a recessed half waffle on the underside. Why is this magic? All half waffle patterns are outboard and are notorious for creating hot spots on long rides. By designing the top to seamlessly transition to a recessed half waffle pattern, your fingers sit perfectly into the grip and allow you full control even in the roughest of conditions without being plagued by hot spots or blisters. The KNUCKLEDUSTER grips truly are an "all day grip" that allow you to keep it Pinned Wide Open at all times! - The benchmark in grip design - DIRT MAG Top 100 Product for 2018 - Featuring DEITY TRC rubber compound for exceptional durability - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Short and wide rib design for added comfort with no side-to-side play - Half-waffle recessed design for added control without hot spots - Chevron v-channel design for your palm swell to give an ergonomic feel - Seamless transition through the end of grip for comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 101 grams for the set

- 31mm grip with micro diamond pattern - Kevlar infused TRC + rubber compound

All Mountain / Gravity grip with non-biased layout. The GA2 has a superb tactile feel thanks to the new super soft, UV stable rubber compound, which is exclusively developed and manufactured in Germany for Ergon. This translates on demanding trials into more control. The ergonomic optimized form allows reduced force to be used when gripping, as the grip zones are matched to the hand. The inner construction varies in thickness to allow greater damping. The inboard clamp allows even more grip area at the end of the bars, and is completely secure and carbon bar friendly. New cool colors increase the style factor. Only 3.8 oz. (107 g) per pair.

Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

Ergon GD1 Evo grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No

The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum

The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday. - Length: 135mm - Lock On: Yes - Weight: 105g

The new GFR1 has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower gripping zone is aggressive to keep gripping forces at a minimum when lifting the front wheel. - Shape: Round - Lock On: Yes - Grip Shift Specific: No - Flange: No

The bar end of the GP2 has been re-engineered, and improvements made to the product – better ergonomics, function and a higher quality feel. The GP2 now has a bar end with an installation friendly clamping system – as do all Ergon bar end models. This makes fitting extremely simple. Carbon bar compatible.

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts

- Soft Kraton rubber construction - Anti-vibration large pad design - Comfortable and non-slip

- Easy-install, slip-on design - Soft Kraton rubber construction - Ergonomic palm rest for enhanced comfort - Integrated end plugs - 135mm

- Classic cork material for no-slip grip - Shock-absorbing construction - Adhesive back for easy installation - Handlebar plugs included - Fits all standard road bicycle bars

- Secure, easy-to-install dual clamping design - Soft, comfortable rubber - Vibration reducing grip pattern - Slip-resistant rubber improves grip - Bar plugs included

- Easy-install, lock-on design - Dual-density Kratyon rubber construction - Oversized palm rest prevents hand fatigue - 131mm

- Ergonomic design that helps reduce pressure points - Double-locking aluminum clamps insure a twist-free grip - Dual density

- Soft Kraton rubber construction - Hexagonal texture for superior all-weather grip - Simple tube shape for comfort - Easy-install, lock-on design - Single locking alloy clamp - End plugs included - 130mm

- The ultimate ergonomic combo grip - Dual-density Kraton rubber foundation - Strategically placed dual-density gel padding - Fully integrated, ergonomic horn bar end - Easy-install, lock-on design - Secure, integrated double locking clamps - 140mm

The classic upper pattern with a waffle finger hold for a better grip. - Compatible with MTB, BMX, ATV, PWC - Weight: 101 grams - Length: 135mm - Diameter: Medium (31mm)

Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.

Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.

- Enough clamp bolts for 4 clamps