Chainrings

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring. There are 3 offsets: 0mm, 3mm, and 6mm - 49mm chainline, 0mm offset for BB30 short-spindle cranks - 52mm chainline, 3mm offset BB30 - 47mm chainline, 6mm offset for cyclocross and road cranks - 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost Notes for use with Fat Bikes: - If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. - If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

The Wolf Tooth 64 BCD Universal Chainring is the perfect solution when you need something smaller than a 30t on your 104/64 BCD cranks or your 11-speed Shimano XT and SLX 96/64 BCD cranks. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - For use with 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Chainline is 46mm on a triple and 48mm on a double crank - Chainline on a standard M8000 or M7000 crankset is 48mm and 50mm on a boost version

- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)

These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with the SRAM RED and Force AXS 8-bolt interface - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 3mm offset is designed for boost cranksets (52mm chainline)

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chains - Material: Aluminum

Tall teeth with alternating tooth profiles hold the chain amazingly well and still provide space for mud to clear. - Full CNC Aluminum rings - Ring Position/Type: Chain Retaining Single Ring - Drivetrain Speeds: 10, 11 - Chainring BCD: 110 SRAM Asymmetric

12 Good Reasons If you're looking for a bomber new chainring that can run with your Shimano 12 speed drivetrain, then look no further. This direct mount ring has the versatility of RF CINCH integration and the stiffness to turn all your "push" into straight-up "go". Built to Last Created from 4mm-thick 7075-T6 alloy plate for big-time stiffness and strength. Its NW tooth profile is Shimano 12-speed specific and provides secure chain retention All-Round Performer The Race Face CINCH interface makes this direct mount chainring fast and easy to swap for different sizes to customize your Shimano 12-speed drivetrain. - Compatible with Cinch Direct Mount Cranks - 7075 Aluminum - Direct Mount

ONEUP YOUR CLIMBING PERFORMANCE AND CLEAN MORE CLIMBS WITH OUR OVAL CHAINRINGS. Our Oval design has 3 main benefits; traction, traction and more traction. Forget any of the power gain claims that you've heard from the road side of the sport. For mountain, oval rings provide a more constant torque to the rear wheel thereby reducing spinouts and stalls on tough climbs. - Get ultimate traction by smoothing out the torque you deliver to your rear tire - 12% ovality (32T is equal to a 30T-34T range) - 115° clocking from crank arm puts the major axis in your power stroke - Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit - Saves over 30g versus stock ring (32T) - Perfect chainline 49mm (corrected from stock 50.4mm) for a quieter drivetrain with improved chain wear and best drop performance. - Includes shims to allow compatibility with your stock Shimano 1X or 2X hardware (no need to buy a new bolt pack) - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from 6mm hard wearing 7075-T6 aluminum plate SPEC - Material: 7075-T6 - Chainline: 49mm - Weight: 46g (30T), 56g (32T) - Colour: Black Compatible with: - M8000 XT and M7000 SLX Cranks and 9,10, 11 and SRAM 12spd chains - 11 speed Shimano XT M8000 1X and 2X armsets - 11 speed Shimano SLX M7000 1X armsets - 11 speed Shimano MT700 2X armsets - 12 speed Shimano MT510 1X armsets NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - 10 speed Shimano XT armsets Colours: Black Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm

OneUp your complete drivetrain with our new Narrow Wide Chainrings. - Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit - Perfect chainline with 2mm Shims included with 32T and 34T rings (30T rings have built in offset). For a quieter drivetrain with improved chain wear and best drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required, saves you $15. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from hard wearing 7075-T6 aluminum plate - 30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible on a 104 BCD crank (loose shims are only included with the 32T-36T sizes). *Shims - Included with 32T and 34T rings. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware - No new bolt packs required! SPEC - Material: 7075-T6 - Weight: 40g (30T), 44g (32T), 54g (34T), 2g (4x shims) - Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed Shimano/Hyperglide Chains) - Colors: Black, Green - Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm

GET A NO COMPROMISE NARROW-WIDE CHAINRING WITH PERFECT CHAINLINE AND SAVE MORE THAN 35G OVER A STOCK SHIMANO RING Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit. - Saves over 35g versus stock ring (32T) - Perfect chainline 49mm (corrected from stock 50.4mm) for a quieter drivetrain with improved chain wear and best drop performance. - Includes shims to allow compatibility with your stock Shimano 1X or 2X hardware (no need to buy a new bolt pack) - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from 6mm hard wearing 7075-T6 aluminum plate SPEC - Material: 7075-T6 - Chainline: 49mm - Weight: 45g (30T), 51g (32T), 60g (34T) Compatible with: - 9, 10, 11 and 12 Speed SRAM Chains. - 11 speed Shimano XT M8000 1X and 2X armsets - 11 speed Shimano SLX M7000 1X armsets - 11 speed Shimano MT700 2X armsets - 12 speed Shimano MT510 1X armsets NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - 10 speed Shimano XT armsets Colors: Black

- 7075-T6 aluminum ring for Easton Cinch system Road/CX/Gravel cranks - Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Narrow-wide tooth profiling prevents chaindrop with a guide or clutch derailleur - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool - 47mm chainline with the Easton 129mm spindle - 38T (80g), 40T (91g), 42T (98g), 44T (105g), 46T (112g), 48T (123g), 50T (137g)